LINEAR FLAT FRONT INSERT MODEL IS1200
The IS1200 insert is part of Archers new Linear Heating Range.
It has all the features of a traditional Archer Gas Log Fire with a superb Modern Linear look.
It incorporates reflective enamelled Firebox Liners to create a 3 dimensional reflection of the flames giving it a visually striking appearance.
The IS1200 Model is 35 Mj Heater with a combustion efficiency of 92% and a 5.9 star energy rating, it has the capacity to heat an area of up to 200 square metres (20 Squares)* and incorporates features such as:
*NOTE: Heating capacity may vary subject to : climate, home design, heater location, ceiling height and installation etc.
|MODEL IS 1200 LINEAR FLAT FRONT INSERT|
|Input 5 settings||Free Standing Flat Front Model FS720g Single Burner|
|Input 5 settings||Nat/LPG
|Fan (Dual)||Automatic 3 speed|
|Heat Settings||5 Settings|
|Heating Areas||Up to 200 square metres (20 squares) subject to climate, home design, heater location, ceiling height and insulation, etc.|
|Clearances||Zero clearance to all surfaces.Note:insert model require minimum clearance of 50mm on each side and top for easy removal of appliance for servicing.|
|Energy Star Rating||
|Tested to AS5263.0-20013
|1200 SERIES TECHNICAL SPECIFICATION|
|1. Flue Outlet Co-axial (outside 65mm, inside 40mm)single flue 40mm Ø. Flexible Flue 40mm Ø. 2. Air Inlet 3. Electric Cord 4. 1/2″ BSP Connection (inside) 6. 90/40mm PVC Elbow 7. Flexible PVC Pipe 8. Heater Surround 9. Flue locating Ring 6″ (150mm)|
|OPTIONAL PAINT FINISHES|
|OPTIONAL POWDERCOAT COLOURS|
|Picture Frame Not Available In Stainless Steel|
|Bolted Surround Charcoal|
|Bolted Surround Stainless Steel|